Walter Woodtronic/UTMA
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.
Standard 30degree back angle. See design Below for 20degree angle.
FACE GRINDING | 12V9
for use on Walter Woodtronicfor use on Euromax (UTMA) | Models: AP800, AP801, AL-802 and AL-803
| Dia (inches) | Thickness (inches) | Hole (mm) | Angle | Insert (inches) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|---|---|
| 6 | 0.50 | 32 | 20 | 0.250 | 0.063 | $0.00 | |
| 6 | 0.625 | 32 | 30 | 0.250 | 0.125 | $0.00 | |
| 6 | 0.625 | 32 | 30 | 0.375 | 0.063 | $0.00 | |
| 6 | 0.625 | 32 | 30 | 0.375 | 0.125 | $0.00 | |
| 6.3 | 0.50 | 32 | 20 | 0.250 | 0.125 | $0.00 | |
| 6.3 | 0.50 | 32 | 20 | 0.375 | 0.125 | $0.00 | |
| 7.874 | 0.625 | 32 | 30 | 0.250 | 0.063 | $0.00 | |
| 7.874 | 0.625 | 32 | 30 | 0.250 | 0.125 | $0.00 | |
| 7.874 | 0.625 | 32 | 30 | 0.375 | 0.063 | $0.00 | |
| 7.874 | 0.625 | 32 | 30 | 0.375 | 0.125 | $0.00 |
Standard 20degree back angle for very fine tooth grinding.
FACE GRINDING | 12V9
for use on Walter Woodtronic| Dia (inches) | Thickness (inches) | Hole (mm) | Angle | Insert (inches) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|---|---|
| 5.906 | 0.512 | 32 | 20 | 0.250 | 0.125 | $0.00 | |
| 5.906 | 0.512 | 32 | 20 | 0.375 | 0.125 | $0.00 | |
| 7.874 | 0.512 | 32 | 20 | 0.250 | 0.125 | $0.00 | |
| 7.874 | 0.512 | 32 | 20 | 0.375 | 0.125 | $0.00 |
Designed for face grinding. Standard 20degree back angle for very fine tooth grinding.
FACE GRINDING | 12V9
for use on Walter Woodtronic | Models: CNC5| Dia (inches) | Thickness (inches) | Hole (mm) | Angle | Insert (inches) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|---|---|
| 6.30 | 0.500 | 32 | 20 | 0.250 | 0.125 | $0.00 | |
| 6.30 | 0.500 | 32 | 20 | 0.375 | 0.125 | $0.00 | |
| 7.874 | 0.512 | 32 | 20 | 0.250 | 0.125 | $0.00 | |
| 7.874 | 0.512 | 32 | 20 | 0.375 | 0.125 | $0.00 |
FACE GRINDING | 12V2
for use on Walter WoodtronicApplication: Special face grinding
| Dia (inches) | Thickness (inches) | Hole (mm) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|
| 7.874 | 0.512 | 32 | 0.125 | $0.00 | |
| 7.874 | 0.512 | 32 | 0.157 | $0.00 |
TOP GRINDING | 14V1
for use on Walter Woodtronic | Models: NC2, NC3, NC4, NC5 and CNC5| Dia (inches) | Thickness (inches) | Hole (mm) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|
| 6 | 0.157 | 32 | 0.250 | $0.00 | |
| 6 | 0.197 | 32 | 0.250 | $0.00 | |
| 7.874 | 0.157 | 32 | 0.250 | $0.00 | |
| 7.874 | 0.197 | 32 | 0.250 | $0.00 |
Designed for double side grinding
SIDE GRINDING | 4A1
for use on Walter Woodtronic | Models: CNC6F| Dia (inches) | Thickness (inches) | Hole (mm) | Insert (inches) | Depth (inches) | Part Number | Price |
|---|---|---|---|---|---|---|
| 3.937 | 0.400 | 32 | 0.156 | 0.188 | $0.00 |