Akemat/UTMA


Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.


Standard 30degree back angle.  20degree back angle available upon request.

FACE GRINDING | 12V9

for use on Akemat | Models: B
for use on Euromax (UTMA) | Models: AP800, AP801, AL-802 and AL-803
Dia (inches)Thickness (inches)Hole (mm)AngleInsert (inches)R1Part NumberPrice
6
0.5032
200.2500.063$0.00
60.5032200.2500.125$0.00
60.62532300.3750.063$0.00
60.62532300.3750.125$0.00
7.8740.5032200.2500.063$0.00
7.8740.5032200.2500.125$0.00
7.8740.62532300.3750.063$0.00
7.8740.62532300.3750.125$0.00


 

FACE GRINDING | 12V2

for use on Akemat-B | Models: B, UB
Dia (inches)Thickness (inches)Hole (mm)Rim (inches)Depth (inches)Part NumberPrice
3.9370.50025/kwy0.1250.125$0.00
4.9210.512320.1570.079$0.00
4.9210.475320.1570.094$0.00
5.9060.475320.1570.094$0.00
7.8740.512320.1250.062$0.00
7.8740.512320.1570.079$0.00


Dual Grit: 150/400; 220/600; 320/800

Triple Grit: 150/400/1200 (Only availalble in .197″ thickness)

Quad Grit: available on request

TOP GRINDING | 14V1

for use on Akemat | Models: U, UB, U2 and U10
for use on Euromax (UTMA) Automatic | Models: AL802, AL803 and AL804 (Requires a keyway)
Dia (inches)Thickness (inches)Hole (mm)Depth (inches)Part NumberPrice
50.157320.250$0.00
50.197320.250$0.00
60.157320.250$0.00
60.197320.250$0.00
7.8740.157320.250$0.00
7.8740.197320.250$0.00


 

SIDE GRINDING | 4A1

for use on Akemat | Models: F | Application: Double side grinding
for use on Euromax (UTMA) Automatic | Models: AF-800 | Application: Face grinding
Dia (inches)Thickness (inches)Hole (mm)Insert (inches)Depth (inches)Part NumberPrice
30.56320/kwy0.1560.188$0.00
3.9370.56320/kwy0.1560.188$0.00